Hopper capacity: 550 Liters

Batch Capacity: 450 Liters

Machine Output: 9 Cu.M. / Hr.

Power: 10 HP 3 Ph. Electric Motor

Water Tank Capacity: 170 Liters

Weighing System: Load cell based weighing system with digital display batch controller.

Hydraulic Pump: 24 Ipm Gear Pump @207 Bar

Gear Ring & Roller: Accurately Machined with gear cutting operation Supported by Heavy duty Twin Rollers Guide

Wheels: Pneumatic Wheels (4 Nos) 6 X 19 / 6 X 16

Jack Levelling: Pin Type (4 Nos.)

Overall Dimensions (mm): 3750 X 2250 X 2850

Weight (Kgs.): 2150

Hopper capacity: 800 Liters

Batch Capacity: 600 Liters

Machine Output: 12 Cu.M. / Hr.

Power: 10 HP. 3 Ph. Electric Motor

Water Tank Capacity: 170 Liters

Weighing System: Load cell based weighing system with digital display batch controller.

Hydraulic Pump: 24 Ipm Gear Pump @207 Bar

Gear Ring & Roller: Accurately Machined with gear cutting operation Supported by Heavy duty Twin Rollers Guide

Wheels: Pneumatic Wheels (4 Nos) 6 X 19 / 6 X 16

Jack Levelling: Pin Type (4 Nos.)

Overall Dimensions (mm): 4000 X 2250 X 3100

Weight (Kgs.): 2250

Hopper capacity: 1050 Liters

Batch Capacity: 750 Liters

Machine Output: 15 Cu.M. / Hr.

Power: 15 HP. 3 Ph. Electric Motor

Water Tank Capacity: 170 Liters

Weighing System: Load cell based weighing system with digital display batch controller.

Hydraulic Pump: 24 Ipm Gear Pump @207 Bar

Gear Ring & Roller: Accurately Machined with gear cutting operation Supported by Heavy duty Twin Rollers Guide

Wheels: Pneumatic Wheels (4 Nos) 7 X 19

Jack Levelling: Pin Type (4 Nos.)

Overall Dimensions (mm): L4100 X W 2350 X H 3300

Weight (Kgs.): 2250

Multiple Cold Aggregate Feeder Bins

Single Deck Scalping Screen

Slinger Conveyor

Drying & Mixing Rotary Drum

Dryer Burner

Multi cyclone Primary Dust Collector

Load Out Conveyor

Asphalt Tank

Mineral Filler Unit

Fuel Service Tank

Control Panel

Control Cabin

Wet Scrubber Secondary Dust Collector

Mounted in the center of wooden screen boards

8”× 3” section.

Two shock absorbing handles.

Vibrator is pushed by the means of handle.

Concrete is poured in the front.

The creed board vibrates the concrete and smoothens the surface.

Capable of vibrating 15-20 ft wide surface.

Vibration is effective for 10” dept.

Builders Hoist is used mostly for carrying up concrete.

Diesel Engine or Electric Motor Drive.

Extra capacity winch for greater safety aspects.

Drive through Fraction rollers.

Safety breaking device.

Tool Box provided to keep weights are : 100kg. 50kg. 20kg.

Duration : length 1860mm. Height 1850mm width: 1290mm.

It is Suitable for Manual Mixer .

It is Suitable for Manual Mixer in Laboratory .

Capacity to Share: 42mm.

Operation: Mechanical Clutch Type.

Body: Heavy body with Co2 welding(26mm HR plate)

Bar Insertion Capacity: 10mm-16mm:4nos.20mm-25mm:2nos.30mm-32mm-36mm-42mm:1nos.

Power: 5H.P at 2900RMP Foot Mounted/ISI Marked.

Starte: Electric starter (D.O.L. Siemens Make)

Wheel: Heavy duty casting wheels 4nos for easy mobility

Hoper Capacity: 500 Ltr.

Batch Capacity: 500 Ltr.

Machine Output/Hour: 10 Cu. M/Hrs.

Power: 5H.P at 2900RMP Foot Mounted/ISI Marked.

Gear & Roller: Made from Cast Iron.

Wheel:Panumatic Wheel (6x9).

Main Structure & Chassis : Made from Rolled S. Channels.

Yoke : Fabricated from M.S. Plate.

Hydroulic With Hoper : Heavy Duty Hydrolic System. Made from MS Sheet.

Mixing Drum : Drum Bottom is of heavy Cast Iron and Drum Top is of M.S. Sheet, Mixing Blades are of two Types one set made from M.S. Plates and the other set (scoop type) made from M.S. Sheet.

Clutch : Made from Heavy Cast Iron, Properly Machined.

Power Transmission : Roller Chains.

Power : 6 H.P. Water/Air 6H.P. Diesel Engine or 5H.P. Electric Motor.

Machine Capacity : 10/7 CFT i.e. 280/200 liters (1 Bag Mix).

Yield of Mix : 12/15 batches of mixed concrete per hour, with adequately trained labour force.

Capacity : 5 Ton. 3 Ton. & 7 Ton.

Power : 50 HP motor/Engine - 53 HP(4YD)/33HP (3YD).

Rope : 25mm Dia/32 Dia.

Clutch : Heavy Duty.

Pully & Shaft : 40" Pully, 3 Group, Sec.B Heavy Duty Shaft.

Drum : Cast Iron with Bush.

Gear : Heavy Duty (M.S.)

Standard Sizes : 14''X23",24"X24",18"X30".

VIBRATION: 3000 to 5000 per minute.

Power Unit:1.95 H.P. or 3.4 H.P. Petrol/ Kerosene Engine,4.4 H.P. Diesel engine or 2 H.P. Electric Motor.